Evie Summers
Lazy Boy sofas are popular upholstered recliners, but they can be bulky and challenging to move. Fortunately, they are designed to come apart, and you can dismantle them for convenient transport or rearranging. Before starting, refer to your specific couch's instruction booklet, as different models have varying mechanisms. This introduction will guide you through the process of taking apart a Lazy Boy sleeper sofa, covering essential tools, safety precautions, and step-by-step instructions for disassembly and reassembly.
| Characteristics | Values |
|---|---|
| Tools | Flathead screwdriver, slotted screwdriver, T-30 drill bit |
| Power furniture precaution | Disconnect all power wires to avoid damaging connections |
| Disassembly | Remove loose cushions, feet, and back cushions |
| Locate and lift locking levers to release seat backs | |
| Remove screws and bolts | |
| Reassembly | Take pictures during disassembly, bag hardware, and label components |
Explore related products
What You'll Learn
Removing the feet
To remove the feet of a Lazy Boy sleeper sofa, follow these steps:
First, determine whether your sofa is a motion sofa or a stationary sofa. Lazy Boy sleeper sofas typically have feet that are either bolted or screwed on, allowing for easy removal and additional clearance during moving. However, it's important to note that not all Lazy Boy sofas are designed to be taken apart. Motion sofas are made to come apart, while stationary sofas are not.
If your sofa is a motion sofa, you can proceed with removing the feet. Start by gathering the necessary tools, such as a flathead screwdriver or a T-30 drill bit. These tools will help you unscrew or detach the feet from the sofa. Before beginning the disassembly process, it is recommended to take pictures of the sofa from different angles. This will serve as a reference for proper reassembly later.
For stationary sofas that don't come apart, you may still be able to remove the feet. Try locating the bolts or screws that secure the feet to the sofa frame. You can use a screwdriver or a drill bit to loosen and remove these fasteners. Again, taking pictures before disassembly is advisable.
During the process, it is helpful to have an extra set of hands to stabilize the sofa and keep its components from rolling away or causing damage. As you remove the feet, place the bolts or screws in labelled plastic bags to keep them organized and easily accessible for reassembly.
By following these steps, you can successfully remove the feet of your Lazy Boy sleeper sofa, making it easier to transport or rearrange your furniture. Remember to refer to your specific sofa's instruction booklet for any model-specific considerations.
The Sleeping Pill Placidyl: What Happened to It?
You may want to see also
Explore related products
Disconnecting power wires
Before you begin to take apart your Lazy Boy sleeper sofa, it is important to disconnect the power wires to avoid damaging electrical components.
First, check if your sofa has a rechargeable battery pack. If it does not, simply unplug the power cord from the wall outlet to cut off the power supply. However, if your sofa has a rechargeable battery, you will need to locate the brightly coloured power cords, typically found at the base of the furniture. The colours of these wires indicate their functions; for instance, blue wires are often for headrests, while orange wires indicate the main power supply.
Using a screwdriver, carefully unlatch the safety clip that secures the wires in place. Once the safety clip is released, gently detach the wires, being mindful not to damage the connections. If you require more access to the wires, you can lift the Velcro flap at the bottom of the sofa frame to locate additional connections. Ensure that you take pictures and keep the hardware in labelled bags to make reassembly easier.
It is important to note that the process of disconnecting power wires may vary slightly depending on the specific model of your Lazy Boy sleeper sofa. Therefore, always refer to your sofa's instruction booklet or user manual for detailed information regarding disassembly and wire disconnection.
Bipolar Type 2: Natural Sleep Aids
You may want to see also
Explore related products
Disassembling the back and seats
To disassemble the back and seats of a Lazy Boy sleeper sofa, start by removing any loose cushions. If your sofa has a detachable back panel, lift it to expose the inner frame. Next, locate the levers that secure the back cushions. Typically, these levers are between each side of the back and the base. Rotate each lever upward, then pull the back cushion out and up to remove it.
If your sofa doesn't have a detachable back panel, feel for the locking levers between the rear seams. You can do this by lifting the back fabric panel or by feeling between the rear seams. Once you've found the levers, lift them to release the seat backs. After unlocking the levers, return the sofa to its normal position and carefully lift the back out of its frame.
If your sofa has a pair of seats divided by a centre console, lift each seat and console back out of its housing. If it doesn't have a centre console, simply lift each seat out.
Now, turn the sofa over to locate the base bars. These are typically bolted to the base and allow for further disassembly. Get someone to help you remove the base bars, especially when removing the last bar, as this will ensure that the components don't roll away or get damaged.
To make reassembly easier, take pictures as you disassemble the sofa and keep bolts, screws, and other hardware in separate plastic bags.
Laneige Sleeping Mask: Morning Routine Must-Have?
You may want to see also
Explore related products
Taking pictures as you take it apart
To prepare for taking apart a Lazy Boy sleeper sofa, it is recommended that you have a flathead screwdriver or a T-30 drill bit. If your sofa has power reclining features, you will also need to disconnect the power by unplugging any wires.
Taking pictures as you take apart your Lazy Boy sleeper sofa will be very helpful when it comes to reassembling it. Before you begin, take a picture of the sofa in its fully assembled state. This will serve as a reference point for when you are putting it back together.
As you start to disassemble the sofa, take pictures of each step. Pay particular attention to the locking levers, seat backs, and base bars. These parts can be tricky to reassemble, so having a visual reference will be beneficial. Take close-up photos of the levers and bars, as well as photos of the overall sofa at each stage of disassembly.
If your sofa has a center console, be sure to take pictures of the layout of the holes. This will help you remember how the pieces fit together. Additionally, take pictures of the underside of the seat, where the pins and screws are located. This will make it easier to remember how to put the seat back together.
Finally, take pictures of the screws and bolts as you remove them. Keeping these in separate plastic bags and labeling them will also aid in reassembly, and taking pictures will provide an extra layer of assurance that you know where each piece goes.
Motrin and Sleep: What's the Connection?
You may want to see also
Explore related products
Removing the locking levers
To remove the locking levers from a Lazy Boy sleeper sofa, follow these steps:
First, locate the locking levers. They are typically found between the rear seams of the sofa, near the centre console or between each side of the back and base. If your sofa has detachable strips of fabric, lift them to expose the frame. If not, feel for the levers with your hands by sticking them into the rear seams.
Once you've located the levers, use a flathead screwdriver or your fingertips to loosen and lift each lever. If your sofa has a power reclining feature, disconnect the power supply by locating the brightly coloured power cords, usually found at the base of the furniture. This step is crucial to avoid damaging the electrical components.
After unlocking the levers, carefully return the sofa to its normal position. Now, you can lift the back out of its frame. If your sofa has a pair of seats divided by a centre console, lift each seat and console back individually.
At this point, you can take pictures of the exposed frame, base, and other relevant features. These pictures will serve as a helpful guide during reassembly, ensuring that each part is correctly reattached.
With the locking levers released, you can now proceed to remove the seats and further disassemble the sofa for transport or rearrangement.
Sleeping Pills for Alzheimer's: Safe or Not?
You may want to see also
Frequently asked questions
The first step is to identify the type of sofa you have. Lazy Boy or La-Z-Boy offers a range of recliners, including rocket recliners, wall recliners, swivel recliners, power recliners, and nursery gliders. Once you know the type of sofa, you can refer to the instruction booklet for specific steps on disassembly. As a general guide, you will need to locate the levers that secure the back cushions, rotate them upward, and then pull the back cushions out. After that, flip the sofa so that its base is facing the ceiling, and use a screwdriver to remove the screws.
For the disassembly process, you will need a flathead screwdriver or slotted screwdriver to unlock levers, and a T-30 drill bit if you need to unscrew the rail holding the seats.
If your Lazy Boy sleeper sofa has power reclining features, it is essential to disconnect the power to avoid damaging electrical components. Locate the brightly coloured power cords, typically found at the base of the furniture, and disconnect them before beginning disassembly.
