Gina Johnson
The Arm's Reach Co-Sleeper Bassinet is a versatile product that can be used as a co-sleeper, play yard, or changing table. While it is a useful product for parents, it can be challenging to assemble and disassemble. Arm's Reach provides interactive instructions and step-by-step videos for setting up and breaking down the co-sleeper. However, some users have reported difficulties in understanding the instructions and have sought additional help from online forums. The process of taking apart the co-sleeper involves a series of steps, including unbuckling straps, removing the resistance plate, releasing Velcro straps, and folding the mattress and co-sleeper frame.
| Characteristics | Values |
|---|---|
| Unbuckling the rear legs | Unbuckle the two nylon straps on the rear legs and pass the buckles through the loops on the front legs |
| Removing the resistance plate | Turn the resistance plate horizontal to the ground and slide it out from under the mattress |
| Releasing the mattress pad | Release the Velcro straps that attach the mattress pad to the co-sleeper and lift the mattress pad free |
| Removing the support bars | Slide the metal support bars up and out of the co-sleeper and place them in the storage bag |
| Folding the lowered bar | Push the center of the front lowered bar up until it folds, then unlock it by pushing the buttons in the center and pushing down |
| Lifting the lowered bar | Lift the lowered bar free of the locking tabs and raise it level with the other upper bars |
| Inserting the bar | Insert the bar into the upper slots and push down until the upper locking tabs click |
| Pulling the handle | Pull the handle in the center of the co-sleeper floor up until the bottom pulls together |
| Folding the top rails | Pull the four top corners together, folding the top rails in and down |
| Pushing the bottom legs | Push the bottom legs together, one side at a time, until they are even with the top corners |
| Folding the mattress | Fold the mattress over the exposed top and sides of the co-sleeper, then roll the co-sleeper over to fold the mattress over the last side |
| Attaching the Velcro straps | Pull the Velcro straps on one end of the mattress through the slots and attach them to the Velcro tabs |
| Using the co-sleeper bag | Pull the co-sleeper bag over the co-sleeper, aligning the carrying handle on the mattress with the handle opening on the bag |
| Storing the sheet | Tuck the co-sleeper sheet into the end of the bag, close the zipper, and store as desired |
Explore related products
What You'll Learn
Unbuckling the nylon straps
To unbuckle the nylon straps, first locate the two nylon straps on the rear legs of the co-sleeper. These straps are what connect the co-sleeper to the adult bed, so they should be easy to identify. Once you've found them, simply unbuckle them.
Now, you'll need to pass the buckles through the loops on the front legs. This will free the co-sleeper from the straps that were attaching it to the bed. Be sure to support the co-sleeper properly as you do this, so that it doesn't fall and cause injury or damage.
Next, you'll need to remove the resistance plate from the adult mattress. To do this, turn the resistance plate horizontal to the ground and slide it under the mattress, out to the side near the co-sleeper. You may need to loosen the strap first.
Finally, release the Velcro straps that attach the mattress pad to the co-sleeper. Once these are released, you can lift the mattress pad free from the metal support bars. Now you've successfully unbuckled the nylon straps and disconnected the co-sleeper from the adult bed. Remember to refer to your co-sleeper manual for helpful illustrations and always check that all the rails and parts have clicked into place when setting up or reassembling your co-sleeper.
Comfortable Air Travel: Sleep Aids for Long Flights
You may want to see also
Explore related products
Removing the resistance plate
To remove the resistance plate from an Arm's Reach Co-Sleeper, first ensure that the co-sleeper is unbuckled from the adult bed. The resistance plate is a plate with straps that secure the bassinet to the bed.
Turn the resistance plate horizontal to the ground and slide it under the mattress. Then, move the plate out from under the mattress on the side near the co-sleeper. You may need to loosen the strap first.
Once the resistance plate is removed, you can separate the co-sleeper from the adult bed. The co-sleeper can then be folded and stored in its carrying bag.
It is important to refer to the co-sleeper manual for detailed instructions and illustrations specific to your model.
Smart Ways to Use a Sleeping Bag Liner
You may want to see also
Explore related products
Detaching the mattress pad
To detach the mattress pad from your Arm's Reach Co-Sleeper, start by releasing the Velcro straps that attach the mattress pad to the co-sleeper. Then, lift the mattress pad free from the metal support bars.
If you are having difficulty pressing down the top rail buttons, try gently pushing and lifting the rails repeatedly to help the bars unlock. You can also slide the metal support bars up and out of the co-sleeper and place them in the storage bag.
To fold the mattress, pull the four top corners of the co-sleeper together, folding the top rails in and down. Lay the co-sleeper on its side on the floor with the top four corners still together. Push the bottom legs together, one side at a time, until they are even with the top four corners. Be sure to push firmly, but do not use excessive force.
Finally, fold the mattress over the exposed top and sides of the folded co-sleeper, aligning the folds of the mattress with the corners of the co-sleeper. The cushioned side of the mattress should be facing in towards the co-sleeper.
Pricing Your Used Sleeper Sofa: A Quick Guide
You may want to see also
Explore related products
Folding the co-sleeper
To fold the Arm's Reach Co-Sleeper, start by pulling the four top corners of the co-sleeper together, folding the top rails in and down. Lay the co-sleeper on its side on the floor, ensuring that the top four corners remain together. Push the bottom legs together, one side at a time, until they align with the top four corners. Be sure to push firmly but avoid using excessive force.
Next, fold the mattress over the exposed top and sides of the co-sleeper, ensuring that the folds of the mattress align with the corners of the co-sleeper. The cushioned side of the mattress should be facing towards the inside of the co-sleeper. Roll the co-sleeper over to fold the mattress over the last remaining side. Pull the Velcro straps on one end of the mattress through the slots on the other end, securing them to the Velcro tabs.
To further break down the co-sleeper, slide the metal support bars up and out. Store these in the provided storage bag. Push the centre of the front lower bar, located below the upper bar, upwards until it folds slightly. Unlock the front lower bar by simultaneously pushing the two buttons located in the centre of the bar under the fabric, and then push the centre of the bar downwards.
To complete the folding process, lift the lowered bar free of the locking tabs and raise it to the level of the other three upper bars. Insert the bar into the upper slots and push downwards until you hear the upper locking tabs click into place. Finally, pull the handle found in the centre of the co-sleeper floor upwards until the bottom of the co-sleeper pulls together and folds.
Sleep Testing at Home: A Guide to Using Devices
You may want to see also
Explore related products
Storing the co-sleeper
To store the Arm's Reach Co-Sleeper, you must first disassemble it. Start by unbuckling the two nylon straps on the rear legs of the co-sleeper and passing the buckles through the loops on the front legs. This will free the co-sleeper from the straps connecting it to the adult bed. Next, remove the resistance plate from the adult mattress by turning it horizontal and sliding it out from under the mattress. Now, release the Velcro straps that attach the mattress pad to the co-sleeper and lift the mattress pad free from the metal support bars.
The next step is to slide the metal support bars up and out of the co-sleeper and place them in the storage bag. To fold the co-sleeper, start by pushing the centre of the front lower bar up until it folds slightly. Unlock the front lowered bar by pushing the two buttons in the centre of the bar under the fabric and then push the centre of the bar down. Now, push the locking tabs at the corners of the lowered bar and push them towards the centre of the co-sleeper. Lift the lowered bar free of the locking tabs and raise it level to the other three upper bars. Insert the bar into the upper slots and push down until you hear the upper locking tabs click.
Pull the handle in the centre of the co-sleeper floor up until the bottom of the co-sleeper pulls together. Press the buttons under the fabric in the centre of each of the remaining three upper bars and push down until each rail folds down towards the floor. Now, pull the four top corners of the co-sleeper together, folding the top rails in and down. Lay the co-sleeper on its side on the floor with the top four corners still together. Push the bottom legs together, one side at a time, until they are even with the top four corners. Be sure to push firmly, but do not use excessive force.
Finally, fold the mattress over the exposed top and sides of the folded co-sleeper. The cushioned side of the mattress should be facing in towards the co-sleeper. Roll the co-sleeper over to fold the mattress over the last side. Pull the Velcro straps on one end of the mattress through the slots on the other end and attach them to the Velcro tabs. Pull the co-sleeper bag over the co-sleeper, aligning the carrying handle on the mattress with the handle opening on the bag. Tuck the co-sleeper sheet into the end of the bag, if desired. Close the zipper on the bag and store it as desired.
Refer to your co-sleeper manual for helpful illustrations and further guidance.
Tylenol PM: Effective Sleep Aid or Not?
You may want to see also
Frequently asked questions
To disassemble an Arm's Reach Co-Sleeper, first, unbuckle the two nylon straps on the rear legs and pass the buckles through the loops on the front legs. Then, remove the resistance plate from the adult mattress by turning it horizontal and sliding it out. Release the Velcro straps attaching the mattress pad to the Co-Sleeper and lift the mattress pad free from the metal support bars. Finally, slide the metal support bars out of the Co-Sleeper and store them in the storage bag.
First, pull the four top corners of the Co-Sleeper together, folding the top rails in and down. Lay the Co-Sleeper on its side with the corners still together and push the bottom legs together until they are even with the top corners. Then, fold the mattress over the exposed top and sides of the Co-Sleeper, ensuring the cushioned side is facing inwards. Roll the Co-Sleeper over to fold the mattress over the last side.
To unlock the bars, push the two buttons in the centre of the bar under the fabric and push the centre of the bar down.
First, unlock the front lowered bar by pushing the two buttons in the centre of the bar and pushing the centre of the bar down. Then, push the locking tabs at the corners of the lowered bar and push them towards the centre of the Co-Sleeper. Lift the lowered bar free of the locking tabs and raise it level with the other upper bars.
After disassembling and folding the Co-Sleeper, pull the Velcro straps on one end of the mattress through the slots on the other end and attach them to the Velcro tabs. Then, pull the Co-Sleeper bag over the folded unit, aligning the carrying handle on the mattress with the handle opening on the bag. Tuck the Co-Sleeper sheet into the end of the bag, close the zipper, and store as desired.
