Herbie Murray
The American Leather Comfort Sleeper is a versatile piece of furniture that transitions from a stylish couch to a sleeper bed. Its disassembly for delivery or moving purposes can be a complex process, with specific tools and steps required. While some dealers offer disassembly and reassembly services, others suggest that it is \fairly easy\ to disassemble. Official instructions for disassembly are available online, and steps include removing the bottom bolts from the bed brackets, sliding, and removing the arms from the couch.
| Characteristics | Values |
|---|---|
| Brand and model name | American Leather Comfort Sleeper |
| Dimensions | Length, width, height, and weight |
| Mattress type and size | Memory foam, latex, or innerspring; Queen, King, Full, etc. |
| Frame material | Wood, metal, or a combination of both |
| Disassembly tools | 1/2” & 7/16 wrench, wood block, mallet, 7/16” socket |
| Disassembly steps | Remove upholstery, arms, frame, and bolts; fold mattress assembly |
Explore related products
What You'll Learn
Remove upholstery and arms
To remove the upholstery and arms of an American Leather sleeper sofa, follow these steps:
Begin by opening the mechanism and placing the middle and front mattress assembly onto the mechanism brackets. You may need tools like a wrench and a wood block or a mallet for this step. Next, roll the assembled sleeper to an upright position. At this point, you should test the mechanism by closing and opening the sleeper.
Now, you can start removing the upholstery. First, remove the bottom bolt from the bracket on each side of the bed. Then, open the bed and remove the other bracket bolt on each side. With the bolts removed, you can carefully lift and remove the mattress assembly.
Once the mattress assembly is removed, you can focus on taking off the arms. This may require some force, as they are often quite securely attached. Use a wrench to loosen any bolts or screws holding the arms in place. If the arms are attached with nails or staples, you may need to use a pry bar or a flathead screwdriver to carefully pry them off. Work slowly and carefully to avoid damaging the surrounding areas.
After removing the arms, you should be left with the bare frame of the sleeper. At this stage, you can choose to keep the removed upholstery and arms for reuse or dispose of them appropriately. Remember to handle the disassembled parts with care, especially if you plan to reuse them, to avoid any damage during the removal process.
Natural Sleep: No Drugs, Peaceful Rest
You may want to see also
Explore related products
$259.15
Take the frame from the seat
Taking apart an American Leather sleeper sofa can be a straightforward process with the right tools and instructions. Here are some detailed steps to guide you through the process of removing the frame from the seat:
Prepare the necessary tools:
Before beginning the disassembly process, gather the required tools. For this task, you will need a 1/2" wrench, a 7/16" wrench, a 5" tall wood block or a mallet, and an optional impact driver. Having these tools ready will make the process smoother.
Understand the frame and seat connection:
The frame of the American Leather sleeper sofa is typically connected to the seat through a combination of bolts and brackets. Understanding this connection is crucial before attempting to separate the two components.
Remove upholstery and cushions:
To access the frame and seat connection, start by removing any upholstery or cushions that may be covering the bolts or brackets. Carefully set aside any upholstery or cushions you intend to reuse or keep.
Locate the bolts:
Once the upholstery and cushions are removed, you should be able to see the bolts securing the frame to the seat. These bolts are typically located on the sides of the seat or underneath, depending on the sofa's design.
Undo the bolts:
Using the appropriate wrench size, usually a 1/2" or 7/16" wrench, loosen and remove the bolts that secure the frame to the seat. Place the wrench on the bolt head and turn it counterclockwise to loosen it. Do this for all the bolts connecting the frame to the seat.
Separate the frame from the seat:
After removing the bolts, carefully lift or slide the frame away from the seat. Depending on the sofa's design, you may need to gently rock or wiggle the frame to detach it completely. Be cautious during this step to avoid damaging the sofa or injuring yourself.
Taking apart an American Leather sleeper sofa requires careful attention to detail and a methodical approach. Always refer to official disassembly instructions, if available, and handle the furniture with care to avoid any damage during the process.
Sleeping Pills Overdose: What are the Risks?
You may want to see also
Explore related products
Fold the mattress assembly
To fold the mattress assembly of an American Leather sleeper sofa, follow these steps:
Begin by opening the mechanism of the sleeper sofa. This will allow you to access the mattress assembly and prepare it for folding. Ensure that the sofa is in the upright position.
Next, remove the bolts from the middle mattress section. There are two bolts on each side of this section, so be sure to remove all four bolts. Once the bolts are removed, carefully lift the middle and front mattress assembly and fold it outward, away from the sofa frame, and place it gently on the floor.
Now, you will need to remove the square back tube. Use a 7/16" socket and wrench to detach it. Following this, you will need to remove another set of bolts. There are two bolts on each side of the camel hump rail, so again, remove all four bolts.
By following these steps, you will have successfully folded the mattress assembly of your American Leather sleeper sofa. Remember to refer to the official disassembly instructions or seek guidance from an authorized dealer if you encounter any challenges or require further clarification.
Deep Sleep Pillow Spray: Safe for Pregnant Women?
You may want to see also
Explore related products
Remove the back tube
To remove the back tube of an American Leather sleeper, follow these steps:
First, ensure you have the necessary tools: a 7/16” socket and a wrench. These tools will be essential for removing the back tube and other components during the disassembly process.
Next, locate the square back tube. It is typically positioned at the back of the sleeper, providing support to the back bed section. Once you have identified the square back tube, use your 7/16” socket to loosen and remove any bolts or fasteners holding it in place.
After loosening the bolts with the socket, you can now use the wrench to complete the removal process. Hold the square back tube securely with one hand and use the wrench to turn the bolt or fastener counterclockwise. Continue turning until the bolt is removed. Be gentle during this process to avoid damaging the threads or surrounding material.
Once all the bolts are removed, carefully lift and remove the square back tube from the sleeper. Set it aside safely, ensuring you don't misplace any bolts or components needed for reassembly.
With these steps completed, you will have successfully removed the back tube of your American Leather sleeper. Remember to keep the removed parts organized and follow similar instructions for other components, such as the back bed section and the camel hump rail, if you are disassembling the entire sleeper.
Dangers of Overdosing on Over-the-Counter Sleep Aids
You may want to see also
Explore related products
Disassemble for delivery
Disassembling an American Leather Sleeper for delivery is a fairly common practice. The process can be completed in a few steps, and there are also instructions and diagrams available from the manufacturer.
Firstly, remove all upholstery. This will involve unscrewing and lifting away the middle and front mattress assembly from the sofa, as well as removing the square back tube with a 7/16” socket and wrench. Next, remove the arms from the couch. This will expose the frame, which can then be removed from the seat itself.
Keep any upholstery or cushions you wish to reuse, and dispose of the rest. Finally, fold the mattress assembly and secure it for safe delivery. This process may be easier with an impact driver, and a 1/2” & 7/16 wrench, wood block, or mallet.
It is important to note that this process should be completed by professionals, and customers should be aware that this may incur additional costs.
Sleeping Pills: Are You at Risk of Addiction?
You may want to see also
