Miya Pearson
The Letscom ID130HR Fitness Tracker is a budget-friendly device that can track your sleep. It has a sleep monitoring feature and continuous heart rate monitoring, and can also track steps, calories, and other fitness metrics. To use the sleep tracking feature, you must first download the VeryFitPro app and pair it with the tracker via Bluetooth. The app provides better visualization and long-term storage of the fitness data. The tracker does not need to be turned off, but rather goes into a sleep mode when not in use.
| Characteristics | Values |
|---|---|
| Name | Letscom ID130HR Fitness Tracker |
| Sleep Tracking | Yes |
| Sleep Mode | Yes |
| Sleep Data | Steps taken, heart rate, sleep quality, sleep patterns |
| Sleep Data Sync | Via the Letscom mobile app |
| Sleep Data Storage | On the Letscom mobile app |
| Sleep Data Visualisation | Via the Letscom mobile app |
| Sleep Mode Activation | Press and hold the button on the tracker |
| Sleep Mode Deactivation | Press the button on the tracker |
| Sleep Mode Indicator | Two dimming lights and vibration |
What You'll Learn
Download the VeryFitPro app
To track your sleep with Letscom, you will need to download the VeryFitPro app. This app is available for both iOS and Android devices. For iOS devices, you can download the app from the App Store, and for Android devices, you can find it on Google Play.
The Letscom ID130HR Fitness Tracker has some system requirements of iOS 7.1 and above or Android 4.4 and above. Make sure that your smartphone meets these requirements before downloading the app.
Once you have downloaded the VeryFitPro app, you will need to connect it to your Bluetooth. To pair the app with your tracker, make sure Bluetooth is enabled on your phone. Then, open the app and select the "Device" button. Choose "Bind Device" and select "ID130HR" or "ID115Plus HR" from the list of devices.
To sync the data from your tracker to the app, simply "swipe down" on the main page of the app when your phone is near the tracker. The app will then collect and store your fitness data, including your sleep data.
The VeryFitPro app allows you to view your sleep data, as well as other fitness metrics such as your daily step count and heart rate. You can also use the app to take photographs and receive notifications for calls, SMS, and emails.
Power Reserve's Sleep Tracking: A Comprehensive Guide
You may want to see also
Pair the app with the tracker
To pair the Letscom app with your tracker, you will first need to ensure that your tracker is charged. To do this, pull apart the watch strap from the middle section and connect the USB to a charger. The USB is located under the touch key button. The tracker will vibrate and a red light will turn on to indicate that it is charging.
While your tracker is charging, you can download the VeryFitPro app from the App Store for iOS devices or Google Play for Android devices. The Letscom ID130HR is compatible with iOS 7.1 and above, and Android 4.4 and above.
Once your tracker is charged and you have downloaded the VeryFitPro app, make sure that Bluetooth is enabled on your phone. Then, open the app and select the Device button. From there, choose Bind Device and select your tracker from the list of devices.
To sync the data from your tracker with the app, simply swipe down on the main page of the app when your phone is near the tracker.
Garmin Lily: Tracking Sleep and Style
You may want to see also
Charge the device
To charge the Letscom ID130HR Fitness Tracker, you must first detach the watch strap from the middle section of the device. The USB port is located underneath the touch key button. Ensure that you insert the USB connector into a USB charger correctly; if done correctly, the device will vibrate and a red light will appear. The device only needs to be charged for 10 minutes.
While the device is charging, you can download the VeryFitPro app, which is compatible with both iOS and Android devices. The app is used in conjunction with the fitness tracker to provide visualisations and long-term storage of fitness data. To use the app, simply pair it with the tracker by enabling Bluetooth on your phone, opening the app, selecting the Device button, choosing Bind Device, and selecting the ID130HR from the list of devices.
The Letscom fitness tracker also comes with a magnetic charging cable, which some users have praised as "super cool" and a great alternative to a plug-in charger.
Garmin Vivofit 3: Sleep Tracking Accuracy Reviewed
You may want to see also
Wear the device to bed
To track your sleep with the Letscom fitness tracker, you will need to wear the device to bed. The tracker will monitor your sleep and provide data on your sleep patterns.
Firstly, you will need to download the VeryFitPro app, which is compatible with both iOS and Android devices. Ensure that Bluetooth is enabled on your phone, then open the app and select the Device button. Choose Bind Device, and select your Letscom device from the list of devices.
Now, you can set up sleep tracking on your device. Press and hold the button on one end of the tracker to switch from active mode to sleep mode. The status light will change to show a moon, and the device will vibrate. To exit sleep mode, simply hold down the button again until the active-mode light (a green, flower-like symbol) appears.
You can also tap the device quickly for about two seconds. The device will vibrate and show two dimming lights to indicate it is in sleep mode. Tap the device quickly for about two seconds again to exit sleep mode.
Another method is to tap the device three times to activate sleep mode. The lights around the edge of the device will turn on sequentially, radiating upward. To exit sleep mode, tap the device three times again.
Finally, you can also hold down the button for about two seconds. The device will vibrate and display a timer, indicating that it is in sleep mode. Hold down the button for about two seconds again to exit sleep mode.
By wearing your Letscom device to bed, you can conveniently track your sleep and gain insights into your sleep patterns and quality of rest.
iPhone Sleep Tracking: No Watch Required
You may want to see also
Sync the data
To sync the data from your Letscom fitness tracker, you will need to download the VeryFitPro app, which is available on the App Store for iOS devices and Google Play for Android devices. Make sure that Bluetooth is enabled on your phone, then open the app and select the Device button. Choose Bind Device and select your Letscom model from the list of devices.
To sync the data in the tracker with the app, simply swipe down on the main page when your phone is near the tracker. The bottom of the mobile app has five buttons: Mainpage, Details, Device, User, and a giant orange plus.
The Letscom app provides better visualisation and long-term storage of the fitness data. You can also set up the Letscom ID130HR tracker to show your incoming calls, SMS, email, or app alerts.
Fossil Smartwatches: Sleep Tracking Features Explained
You may want to see also
Frequently asked questions
You will need to charge your device for 10 minutes before first use. To do this, pull apart the watch strap from the middle section and insert the USB into a charger. The tracker will vibrate and a red light will appear when charging is enabled. While charging, download the "VeryFitPro" app from the App Store for iOS devices or Google Play for Android devices. After charging, ensure Bluetooth is enabled on your phone, open the app, and select the Device button. Choose Bind Device, select “ID130HR” from the list of devices, and sync the data in the tracker with the app by swiping down on the main page.
The Letscom ID130HR Fitness Tracker has a sleep tracking feature. To enable it, press and hold the button on one end of the tracker to switch from active mode to sleep mode. The status light will change to show a moon and the device will vibrate. To exit sleep mode, hold down the button again until the active-mode light comes on.
To sync the Letscom ID130HR Fitness Tracker with your phone, make sure Bluetooth is enabled on your smartphone. Then, open the VeryFitPro app and scroll down while holding the screen. This will sync the data in the tracker with the app.
One issue with the Letscom ID130HR Fitness Tracker is that the process of monitoring the heart rate involves the use of a bright green strobing light, which may wake up light sleepers. Another issue is that the tracker does not record afternoon naps as sleeping. Finally, messages from the phone are displayed too briefly, and there is no way to go back and read them again.
