Jabra's Sleep Tracking: How Accurate Is It?

Jabra's Bluetooth headphones are known to go into sleep mode when no signal is being sent to them, and there is a slight delay once a signal is sent. This is a power-saving feature that kicks in after 15 minutes to an hour of no Bluetooth connection.

Jabra 37 Bluetooth headphones go into sleep mode if no signal is being sent to them

The Jabra 37 Bluetooth headphones are designed to conserve power by automatically entering sleep mode when no audio signal is detected. This feature, while intended to improve battery life, has caused some frustration among users who experience a delay when attempting to resume audio playback after a period of inactivity.

When the Jabra 37 headphones are connected to a device but no audio stream is being transmitted, they will enter sleep mode after approximately one hour. Similarly, if the headphones are turned on without an active Bluetooth connection, they will enter sleep mode after 15 minutes. This power-saving feature cannot be disabled through the Jabra Direct settings, leading some users to resort to creative workarounds to maintain an active connection and prevent the headphones from sleeping.

One common workaround is to play a silent YouTube video in a separate tab, tricking the headphones into detecting an audio signal and remaining active. While effective, this method is less than ideal as it requires users to keep the video playing continuously. Another potential solution involves adjusting the Windows power settings. Specifically, users can navigate to "Windows Settings -> System -> Power & Sleep," then scroll down to "Additional power settings" and make changes to the "USB Selective suspend" settings. However, this approach may not work for all users, as reported by some individuals.

It is worth noting that while the sleep mode feature is designed to prolong battery life, it can be inconvenient for users who frequently experience delays when attempting to use their headphones after a period of inactivity. This issue has persisted for several years, and despite attempts by users to find solutions, there does not appear to be a straightforward fix or an official option to disable the auto-sleep function.

There is a delay when a signal is sent to the Jabra 37 headphones after they have gone into sleep mode

The Jabra 37 Bluetooth headphones are designed to go into sleep mode when no signal is being sent to them. This feature helps conserve battery power when the headphones are not in use. However, a common issue with these headphones is the delay that occurs when a signal is sent to the headphones after they have entered sleep mode.

This delay can be quite frustrating for users, especially considering the premium price of the Jabra 37 headphones. The delay typically lasts a minute or so, and it can be challenging to find a solution that consistently works. While some users have suggested workarounds, such as playing a silent YouTube video or using a white noise generator in the background, these solutions are not ideal and can be cumbersome.

The sleep mode settings in the Jabra Direct software and the Jabra app do not seem to provide a fix for this issue. Additionally, the problem persists across different models of Jabra headphones, including the Jabra 75t, Jabra Evolve 65, and Jabra 930. This suggests that the delay may be inherent in the way Jabra's sleep mode function is programmed.

To address this issue, it is recommended to contact Jabra's customer support team for further assistance. They may be able to provide additional troubleshooting steps or offer guidance on how to optimize the sleep mode settings to minimize the delay. It is important to note that the delay may vary depending on the device the headphones are connected to, such as a PC or Android tablet, and specific settings on these devices may also impact the behavior of the sleep mode function.

The Jabra 37 headphones go into sleep mode after 15 minutes of being on without a Bluetooth connection

The Jabra 37 Bluetooth headphones are designed to conserve power by automatically entering sleep mode when not in use. This feature ensures that the headphones turn off after a certain period of inactivity, preserving battery life.

Specifically, the Jabra 37 headphones will enter sleep mode if they are turned on without a Bluetooth connection for 15 minutes or more. This means that if you forget to turn off your headphones after use, they will automatically power down to save energy.

It's important to note that this sleep mode feature is different from simply turning off the headphones. When in sleep mode, the headphones are still powered on but in a low-power state, waiting for a signal to resume playback. This is why there is a slight delay when you turn them on again or start playing audio after a period of inactivity.

To avoid this delay, some users have found workarounds, such as playing a silent YouTube video or using a white noise generator, which prevents the headphones from entering sleep mode. However, these solutions may not be ideal as they require constant audio input to keep the headphones active.

The sleep mode issue is also present in the Jabra Evolve 65 SE stereo

The Jabra Evolve 65 SE stereo headset has been reported to have a sleep mode issue. This issue is characterised by a delay in audio output when the headset reconnects to a device after a period of inactivity. The issue appears to occur when the headset enters sleep mode due to no signal being sent to it, and there is a subsequent delay in audio output once a signal is sent. This problem is not limited to the Evolve 65 SE model, as other models in the Evolve range, including the Evolve2 65/75/85, have been reported to have the same issue.

The cause of this issue is believed to be related to power-saving settings, as suggested by a user, and Jabra has confirmed that it is a designed behaviour to preserve battery life. However, some users find this issue annoying, especially since there is no option to turn it off or customise it.

One user has found a workaround for this issue on a PC. By playing a white noise generator in the background, the connection to the headset is kept alive, preventing the headset from entering sleep mode and eliminating the audio delay. While this solution works, it is not ideal as it requires an extra step and runs in the background while using the headset.

Another user has described a similar issue with their Evolve 65 SE stereo headset, where the problem occurs when the "headset" option is selected on the "speaker/volume" menu on the volume toolbar. The user found a compromise by selecting the "headphone" option, which resolved the audio delay issue but disabled the microphone. When using audio/video recording software, the microphone would activate, causing the input to switch back to the "Jabra headset", resulting in the 1.5-second delay issue.

Playing a silent YouTube video prevents the Jabra Bluetooth headphones from going into sleep mode

The Jabra 37 Bluetooth headphones are designed to conserve power by automatically going into sleep mode when no audio signal is detected for a certain period. This feature, while beneficial for saving power, can be frustrating for users who experience a delay when they resume listening.

To prevent the headphones from entering sleep mode, some users have found a workaround by playing a silent YouTube video in another tab. This method keeps the headphones active by sending a continuous signal, eliminating the need to repeatedly wake the device.

While this workaround is effective, it is not ideal as it requires users to have an additional tab open and running at all times. Additionally, it does not address the underlying issue of the automatic sleep mode function.

Another potential solution is to use a noise generator, such as svchost.exe (sys32), which runs the microphone in the background and prevents the headset from sleeping when the audio is quiet. However, this option may raise privacy concerns for some users.

It is worth noting that the sleep mode issue seems to be specific to certain models of Jabra headphones, such as the Jabra 37 and Jabra Evolve 65 SE stereo, and may not be a widespread problem across all Jabra Bluetooth headphones. Users experiencing this issue can try the workarounds mentioned above or seek further assistance from Jabra's support team to find a more permanent solution.

Frequently asked questions