Fitbit Inspire: Missing Rem Sleep Data?

Fitbit devices are a great option for gaining insight into your sleep habits and understanding whether you're getting a sufficient amount of quality sleep. All Fitbits, except the Fitbit Zip, monitor your sleep patterns when you sleep for at least one hour, detecting how much time you spend awake, restless, and asleep.

If you own a newer version of Fitbit with a heart rate sensor, you get a more detailed sleep report showing your sleep stages as light, deep, and REM sleep time when you sleep for 3 hours or more. These Fitbits use your movement and heart rate information to estimate how long you spend in each stage.

However, some users have reported issues with their Fitbit Inspire 2 not tracking sleep. This could be due to several reasons, such as the device being in On Clip mode, a low battery, incorrect wrist placement, or sensitive sleep settings.

Fitbit Inspire 2 may not be tracking sleep due to low battery

If your Fitbit Inspire 2 is not tracking your sleep, there could be a few reasons why. Here are some troubleshooting tips to help resolve the issue:

Check the battery level

First, check your Fitbit's battery level. If the battery is critically low, your device may have switched off the sleep-tracking function to preserve its battery life. Ensure that your Fitbit is sufficiently charged before going to bed. If you are short on time, charging your Fitbit for 20-30 minutes before you sleep should provide enough battery life to last through the night.

Sync your Fitbit with the app

Make sure to sync your Fitbit with the app after waking up to see your sleep statistics. If you are missing the previous night's sleep data or if the app shows no data in the sleep tile, try syncing before assuming there is an issue. You can manually sync your Fitbit by going to the "Today" tab and tapping and holding the screen, then pulling down to see the sync progress bar. Alternatively, you can go to the Devices icon, choose your Fitbit model, and select "Sync Now".

Check the "On Wrist" mode

Ensure that the "On Wrist" mode is switched on. The Inspire 2 can be worn on the wrist or as a clip. If the "On Clip" mode is active, the tracker does not monitor heart rate or sleep. To check this setting, open the main clock face, scroll up to Settings, and choose the clip option.

Restart your Fitbit

Restarting your Fitbit can often solve various problems. For most newer model Fitbits, go to Settings > Shutdown, Reboot, or Restart Device (or About > Shutdown) > Yes. You can also manually restart your device by pressing and holding the button(s) for 10 seconds until the Fitbit logo appears on the screen.

Wear your Fitbit correctly

Make sure that your Fitbit is snug against your wrist, but not too tight. For ideal results, Fitbit recommends wearing the device 2-3 finger widths above your wrist bone.

Change the sleep sensitivity setting

There are two sleep sensitivity settings: "Sensitive" and "Normal". The "Sensitive" setting records nearly all movements as time spent restless or awake, while the "Normal" setting only counts significant movements such as rolling over. Try one option, and if that does not resolve the issue, try the other.

If none of these solutions work, your device may be faulty, and it is best to contact Fitbit Support directly. Your Inspire 2 might still be under warranty.

Fitbit Inspire 2 may not be tracking sleep due to incorrect wrist placement

If your Fitbit Inspire 2 is not tracking your sleep, there are a few things you can try. Firstly, ensure that your Fitbit is on ""Wrist Mode" and not "Clip Mode". The Inspire 2 can be worn on the wrist or as a clip, and if the "Clip Mode" is active, the tracker will not monitor heart rate or sleep. To check this, open the main clock face on your Fitbit, scroll up to "Settings", select this, and then scroll to find the "Clip" option.

Another thing to check is your battery life. The Inspire 2 has a 10-day battery life, which is excellent, but this might give you a false sense of security. If the battery is critically low, the sleep function will automatically turn off, so make sure you are sufficiently charged before going to bed.

It is also important to wear your Fitbit correctly. For ideal results, Fitbit suggests wearing the tracker a bit higher than you would during the day—2-3 finger widths above your wrist bone. It should be snug but not too tight.

You can also try changing the sleep setting to "sensitive" or "normal". The "sensitive" setting will cause your tracker to record nearly all movements as time spent restless or awake, whereas the "normal" setting will only count significant movements, such as rolling over, as being awake.

If none of these solutions work, your device might be faulty, and it is best to contact Fitbit Support directly. Your Inspire 2 may still be under warranty.

Fitbit Inspire 2 may not be tracking sleep due to incorrect settings

If your Fitbit Inspire 2 is not tracking your sleep, there are a few things you can try. Firstly, make sure that the ""On Wrist" mode is switched on. The Inspire 2 can be worn on the wrist or as a clip, and if the "On Clip" mode is active, the tracker will not monitor heart rate or sleep. To check this setting, open the main clock face and scroll up to Settings. From there, scroll to find the clip option.

Another thing to check is your battery life. The Inspire 2 has an excellent 10-day battery life, but if the battery is critically low, the device will automatically turn off the sleep function to preserve power. So, make sure your device is sufficiently charged before you go to bed.

It is also important to ensure that you are wearing your Inspire 2 correctly. Fitbit suggests wearing the device a bit higher than you would during the day—2-3 finger widths above your wrist bone. It should be snug but not too tight.

Additionally, you can try changing the sleep sensitivity setting. There is a "sensitive" setting that causes the tracker to record nearly all movements as time spent restless or awake. The "normal" setting, on the other hand, only counts significant movements, such as rolling over, as being awake. Try one option, and if that doesn't resolve the issue, try the other.

If none of these solutions work, your device might be faulty, and it is best to contact Fitbit Support directly. Your Inspire 2 may still be under warranty.

Fitbit Inspire 2 may not be tracking sleep due to faulty hardware

The Fitbit Inspire 2 is a great, low-cost option for those looking to track their sleep patterns. However, some users have reported issues with the device not tracking their sleep at all. If you find yourself in this situation, there are a few troubleshooting steps you can take to try and resolve the issue.

First, ensure that your Inspire 2 is set to "On Wrist" mode. The Inspire 2 can be worn on the wrist or as a clip, and if the "On Clip" mode is active, the tracker will not monitor heart rate or sleep. To check this setting, open the main clock face, scroll up to Settings, and look for the clip option.

Next, make sure that your Inspire 2 has enough battery life. While the device boasts an impressive 10-day battery life, if the battery is critically low, the sleep function may automatically turn off. So, be sure to charge your device before bedtime.

Another common solution is to restart your Inspire 2. This often irons out any problems you may be experiencing and is the go-to solution for any issues with a Fitbit device. You can find instructions on how to restart your Inspire 2 in the device manual.

It is also important to ensure that you are wearing your Inspire 2 correctly. Fitbit suggests wearing the device snugly against your wrist, but not too tight. For optimal results, wear it a bit higher than you would during the day, about 2-3 finger widths above your wrist bone.

Additionally, you can try changing the sleep setting. There is a "sensitive" setting that records nearly all movements as time spent restless or awake. The "normal" setting, on the other hand, only counts significant movements, such as rolling over, as being awake. Try one option, and if that doesn't work, try the other.

If you have tried all of the above steps and your Inspire 2 is still not tracking your sleep, it is possible that your device may be faulty. In this case, it is best to contact Fitbit Support directly, as your device may still be under warranty.

By following these troubleshooting steps, you should be able to resolve any issues with your Fitbit Inspire 2 not tracking your sleep due to faulty hardware.

Fitbit Inspire 2 may not be tracking sleep if worn as a clip

The Fitbit Inspire 2 is a great choice for those seeking a low-cost, discreet wearable that monitors health and fitness 24/7. It automatically records sleep data, so there are no buttons to press. However, if your Inspire 2 is not tracking sleep, there are several things you can try.

Firstly, ensure the "On Wrist" mode is switched on. The Inspire 2 can be worn on the wrist or as a clip, and if the "On Clip" mode is active, the tracker does not monitor heart rate or sleep. To check this, open the main clock face, scroll up to Settings, and ensure "On Wrist" mode is selected.

Secondly, make sure your Inspire 2 is sufficiently charged. While the device boasts an impressive 10-day battery life, a critically low battery may cause the wearable to turn off the sleep function to preserve power.

Thirdly, restart your Inspire 2. This is a go-to solution for any issue with a Fitbit device and often irons out problems.

Additionally, check that you are wearing your Inspire 2 correctly. Fitbit suggests wearing it a bit higher than you normally would during the day, about 2-3 finger widths above the wrist bone, in a snug but comfortable position.

Finally, try changing the sleep setting. There is a "sensitive" setting that records nearly all movements as time spent restless or awake, and a "normal" setting that only counts significant movements, such as rolling over, as being awake. Try one option, and if that doesn't work, switch to the other.

If none of these solutions work, your device may be faulty, and it is best to contact Fitbit Support directly.

Frequently asked questions