Using Sleep Styler On Short Hair: A Guide

how to use sleep styler for short hair

The Sleep Styler is a set of curlers that can be used to curl your hair while you sleep, eliminating the need for heat styling the next day. The Sleep Styler comes in two sizes: large and mini. The mini Sleep Styler is recommended for people with short hair. To use the Sleep Styler, you should start with damp hair and curl your hair around the rollers, securing them with the attached Velcro straps. Then, you can sleep with the rollers in and remove them when you wake up to reveal curled hair. Some people find the Sleep Styler comfortable to sleep on, while others find it uncomfortable or difficult to use.

Characteristics Values
Cost $35
Hair type Short, fine hair
Hair preparation Wash hair, let it air dry for 45 minutes, brush hair to remove tangles
Curlers Memory foam cylinder wrapped in yoga mat fabric, 8 mini (3-inch) rollers
Curling technique Divide hair into 1-inch sections, curl hair around the curler, curl the cord around hair in the opposite direction to hold it in place, secure with Velcro straps
Results Curly, wavy, or straightened hair, depending on desired style
Pros No heat required, saves time in the morning, comfortable to sleep in, soft, good volume
Cons Takes practice to use, rollers may fall out, uncomfortable to sleep with, hair gets caught in Velcro, overpriced, long drying time

shunsleep

Opt for the mini Sleep Styler for short hair

If you have short hair, the mini Sleep Styler is the best option for you. The mini Sleep Styler is ideal for people with short haircuts and thin hair. The mini Sleep Styler set typically includes 12 three-inch rollers, though some sets include eight rollers. The mini rollers are perfect for putting a smaller amount of hair in each one, which is ideal for those with thin hair.

The Sleep Styler is a heat-free hairstyling system that allows you to curl your hair overnight without using a heating iron the next day. To use the mini Sleep Styler, start by taking a shower and drying your hair so that it's damp. Avoid using the rollers on dry or soaking wet hair, as damp hair is most effective for achieving noticeable curls. Brush your hair to remove any tangles and make it easier to put in the rollers.

Next, divide your hair into one-inch sections. Working in sections will help make the curls look more pronounced later on. You can also tie up the top half of your hair to make it easier to start putting the rollers in from the top and work your way down. Secure the rollers in place using the attached Velcro straps. Wrap your hair around the rollers, ensuring even coverage and tension.

Finally, sleep with the rollers in your hair. You can cover your head with a shower cap or a headscarf to keep the rollers in place while you sleep. In the morning, gently remove the rollers to reveal your beautiful curls.

Hypnosis and Sleep: Can They Coexist?

You may want to see also

shunsleep

Prepare damp hair

To prepare damp hair for the Sleep Styler, start by taking a shower and drying your hair so that it's damp. Avoid blow-drying or towel-drying your hair completely, as the Sleep Styler works best on damp hair. Instead, ensure your hair is around 50% dry, as very wet hair can lead to deflated curls.

Brush your hair to remove any tangles and make it easier to insert the rollers. Section your hair into 1-inch (2.5 cm) wide portions. Working in sections will help make the curls more pronounced. If you have long, thick hair, tie the top half into a bun before adding the rollers.

Apply a gel or mousse to your damp hair for added hold and longer-lasting curls. For example, you can use MoroccanOil Medium Hold Gel. Distribute the product evenly throughout your hair, focusing on the sections you plan to curl.

Once your hair is damp, brushed, and prepared with product, you can begin inserting the Sleep Styler rollers.

shunsleep

Divide hair into sections

If you have short hair, opt for the mini Sleep Styler rollers. These are perfect for people with short haircuts and thin hair, as they allow you to put a smaller amount of hair in each roller.

To begin, divide your hair into 1-inch (2.5 cm) sections. You can use a rat-tail comb or your fingers to separate each section. If you have long, thick hair, put the top half into a bun so you can gradually add in the rollers. Working in sections will help make the curls look more defined later on. Additionally, tying up the top half of your hair will make it easier to start putting the rollers in from the top and work your way down. If you have bangs, consider sectioning those off as well.

Once you've divided your hair into sections, it's time to start adding the rollers. Make sure your hair is damp before you begin. This will help you achieve noticeable curls, as wet hair is more likely to adhere to the roller and mimic its shape. However, don't put the rollers in when your hair is soaking wet. Instead, blow-dry it at a low temperature or towel dry it until it's no longer dripping. You can also add some gel to your hair for extra hold.

Breathe Easy: Sleeping with Oxygen

You may want to see also

shunsleep

Put rollers in without slipping

To use the Sleep Styler on short hair without the rollers slipping, it is recommended that you use the mini Sleep Styler rollers, as these are designed for short haircuts. Having more rollers lets you put a smaller amount of hair in each one, which is perfect for those with thin hair.

Before putting in the rollers, it is important to prepare your hair. Firstly, your hair should be damp, not wet. You can achieve this by blow-drying your hair at a low temperature or towel-drying it until it is no longer dripping. Then, brush your hair to ensure there are no tangles, as this will make it easier to put the rollers in and prevent slipping.

Next, divide your hair into 1-inch (2.5 cm) sections. Working in sections will help to make the curls look more pronounced later on. You can use a rat-tail comb or your fingers to separate each section.

When putting in the rollers, start by prepping your hair with a product to make it easier to form a grip. You can use mousse on damp hair or brush through dry hair. Then, curl your hair around the curler and then curl the cord around your hair in the opposite direction to hold it in place.

It might take a few practice tries to get the hang of putting the rollers in without them slipping, but don't worry if they're not placed perfectly. With a bit of practice, you'll be able to use the Sleep Styler to achieve beautiful, curly hair without any heat damage.

shunsleep

Secure rollers with Velcro straps

Once you have selected the appropriately-sized rollers for your hair length and thickness, and have divided your hair into sections, you can begin to secure the rollers with the attached Velcro straps.

First, ensure that your hair is wrapped evenly around the rollers, with consistent tension throughout. Then, take the Velcro strap and wrap it around the roller and your hair. The strap should be tight enough to hold the roller in place, but not so tight that it causes discomfort or leaves marks on your hair.

If you are using the mini rollers, you may find that they are harder to secure than the larger rollers. This is because there is less surface area to work with when securing the strap. Take care to line up the strap properly, and consider compressing the roller slightly to give the strap more area to grip.

If you have particularly thick hair, you may need to add an extra set of rollers to ensure that the rollers stay in place. You can also use gel in your hair before applying the rollers to help them last longer.

It is important to note that some users have reported issues with the Velcro straps, including hair getting caught in the Velcro and rollers falling out. If you experience these issues, you may need to adjust the tightness of the strap or try a different method of securing the rollers.

Frequently asked questions

If your hair is short and thin, opt for the mini Sleep Styler. Divide your hair into 1-inch sections, and tie up the top half of your hair to make it easier to put in the rollers. Curl your hair around the rollers and then curl the cord in the opposite direction to hold it in place.

Your hair should be damp, not wet, before you put in the Sleep Styler rollers. Blow-dry your hair at a low temperature or towel dry it until it's no longer dripping.

Some people have reported that the Sleep Styler is decently comfortable to sleep in, while others have said that it feels like sleeping on a lumpy pillow.

Written by
Reviewed by

Explore related products

Share this post
Print
Did this article help you?

Leave a comment