Colin Snow
Taking down a Sleep Number mattress is a complex process that requires careful execution. Sleep Number mattresses are heavy and differ from traditional mattresses in that they are often smart beds with adjustable bases, making them more delicate and challenging to move. The process of dismantling the mattress and its base involves multiple steps, and it is recommended to have at least two people for this task.
| Characteristics | Values |
|---|---|
| Number of people required | 2 |
| Tools required | Air pump, hand-held controller, socket wrench, packing boxes, packing material |
| Steps | 1. Deflate mattress to 100. 2. Detach air hoses and place air chamber caps on hose connectors. 3. Place mattress in a plastic bag (for Smart beds) or remove and pack all foam parts (for Traditional beds). 4. Unplug the air pump. 5. Remove the mattress retainers from the base. 6. Unscrew the screws at the head and foot of the base to remove the rails. 7. Unzip the mattress and remove the top panel, foam comfort pad, and air chambers. |
Explore related products
What You'll Learn
Deflate the mattress
To deflate your Sleep Number bed mattress, press the down arrow on the hand-held controller. If you have a double-chamber mattress, hold the "R" right or "L" left button simultaneously with the down arrow button. When the display reads zero, all the air is out of the chambers.
If you are moving a Sleep Number 360 Smart Bed or a mattress with an adjustable base, use your Sleep Number remote or the app on your phone to deflate the mattress to 100. This makes your mattress lighter and easier to move.
If you have a Classic Sleep Number mattress, you can deflate the mattress and then detach the air hoses on each side of the bed. Place the air chamber caps on the hose connectors.
If you have a Sleep Number 360 Smart Mattress, the manufacturer does not recommend disassembling the mattress before moving it as it could void your warranty. Instead, detach the hose connections from the pump and the mattress. Push in the tab at the end of the hose and gently pull to disconnect. As soon as you pull the hose out, cap off the air chamber to prevent the mattress from deflating.
For traditional beds, take photos of the inside of your mattress as you disassemble it. This will help you reassemble the bed correctly.
Sleeping Pills and Paxil: What's Safe?
You may want to see also
Explore related products
Disconnect hoses
Disconnecting the hoses of a Sleep Number mattress is a crucial step in taking it down or disassembling it, especially if you are planning to move it to a new location. Here is a detailed guide on how to do it:
Locate the Zipper and Unzip the Mattress:
Start by locating the zipper of your Sleep Number mattress. The zipper is typically found at the head of the bed. Unzip the mattress cover all the way around. If your mattress is a duvet-style with two zippers, you should unzip the bottom zipper. This will allow you to access the internal components of the mattress.
Find the Hose Attachment:
Once the mattress is unzipped, you need to locate the hose attachment. Look for a gray tab on the side of the mattress where the hose connects to the air chamber. This tab is crucial for detaching the hose.
Disconnect the Hoses:
To disconnect the hoses, gently push in the gray tab on the side of the mattress. While holding the tab, gently pull the hose out of the mattress cover. Be careful not to use excessive force as you don't want to damage the hose or the connection point. Repeat this process for each hose. Some Sleep Number beds have two hoses per air chamber, so ensure all hoses are disconnected.
Secure the Air Chambers:
After removing the hoses, you will have access to the air chambers. It is important to secure the air chambers to prevent air leakage. You can do this by capping off the air chambers with the provided caps. These caps are usually white and can be found near the air pump or attached to the top or foot of your bed. Place the caps on the hose connectors to prevent air from escaping.
Additional Steps for Traditional Beds:
If you have a traditional Sleep Number bed, there are a few additional steps. After disconnecting the hoses, you will need to unplug the Firmness Control System (FCS). The FCS is the large white unit with hoses attached. Unplug it from the power outlet and then pack it securely in a box with packing material to keep it safe during transport.
Disconnecting the hoses of your Sleep Number mattress is an important step in taking it down. Remember to be gentle and careful throughout the process to avoid any damage to the mattress or its components. Always refer to the official Sleep Number support website for the most up-to-date and accurate instructions.
Combining Zoloft and Sleeping Pills: What You Need to Know
You may want to see also
Explore related products
Remove air chambers
To remove the air chambers from your Sleep Number mattress, follow these steps:
First, locate the zipper at the head of your bed and unzip the mattress cover all the way around. If your mattress is a duvet-style with two zippers, unzip the bottom zipper. Then, remove the top panel of the mattress cover and the foam comfort pad. You may need to fold back or remove any foam comfort pads or foam border walls at the head of the bed.
Next, disconnect the hoses from the air chambers. Locate the hose connections at the head of the bed, which is usually where the hoses exit the mattress. You may need to press a button or tab on the hose connection to release it from the air chamber. Gently pull the hoses out of the mattress cover.
If your air chamber has two connection points, you may need to use two caps to prevent air loss. The caps are usually stored inside the mattress, near the pump, or at the foot of the bed. Place the caps on the hose connectors to prevent air loss and potential damage during transit.
Now that the hoses are disconnected and capped, you can proceed to remove the air chambers from the mattress. Carefully lift and remove the air chambers, being mindful of any remaining foam parts or corner locks that may be attached. Set aside any foam parts and ensure you keep track of their original placement for reassembly.
Taking down a Sleep Number mattress can be a complex process, and it is recommended to have assistance when removing the air chambers to make the process easier and safer.
Tincture for Sleep: THC's Calming Effect
You may want to see also
Explore related products
![Full Size Mattress [Upgraded Strengthen] 12 Inch Firm Full Mattress in a Box, Hybrid Mattresses With Gel Memory Foam & Independent Pocket Springs, Release Stress, Strong Edge Support,365-Night Trial](https://m.media-amazon.com/images/I/71WxV97InaL._AC_UL320_.jpg)
Unplug the pump
Unplugging the pump is a crucial step in taking down a Sleep Number mattress. The Sleep Number Bed is an air mattress that allows users to adjust the amount of air inside to their preferred firmness. The process of unplugging the pump will vary slightly depending on the model of your Sleep Number mattress.
For a Traditional Sleep Number mattress, you will need to locate the Firmness Control System, which is the large white unit with hoses attached. This unit is usually found at the head or foot of your bed. Once located, simply detach the air hoses connected to the pump and unplug it from the wall outlet. It is important to then pack the pump securely to protect it during the move.
If you own a Sleep Number 360 Smart Mattress, the process is slightly different. The pump on this model is located inside the base, and the hoses can be detached by pushing in the tab at the end of the hose and gently pulling to disconnect. After pulling out the hose, the air will start to leak, so it is important to cap off the air chamber as soon as possible. These white caps usually come with the bed and can be found attached to the top or foot of the mattress.
It is important to note that the manufacturer does not recommend disassembling the Sleep Number 360 Smart Mattress before moving it, as this could void the warranty. Instead, it is suggested that you deflate the mattress and move it in one piece.
Overall, unplugging the pump is a straightforward task, but it is important to follow the specific instructions for your mattress model to ensure a safe and efficient disassembly process.
Mastering the Sleep Function: A Guide
You may want to see also
Explore related products
Pack the mattress
Before packing the mattress, it is important to deflate it. If you have a double chamber mattress, press the right or left button along with the down arrow button. If you have a Sleep Number 360 Smart Mattress, press the right or left button along with the up arrow button. Once the display reads zero, the mattress is fully deflated.
Next, unzip the mattress while it is still in a flat position. Locate the mattress zipper at the head of the bed and unzip all the way around. If your mattress has two zippers, unzip the bottom zipper.
Now, you can start removing the internal components. First, remove the hose by gently pressing the grey tab and then pulling it out. Repeat this process for the other side of the bed if necessary. Then, remove the air chambers, foam border walls, and corner locks. Place the air chamber caps on the hose connectors to protect them during transit.
For traditional mattresses, remove and pack all the foam parts. For smart mattresses, place the mattress in a plastic bag. It is recommended to take pictures of each layer as you disassemble to make reassembly easier.
Finally, locate the pump, also known as the firmness control system. Carefully detach the air hoses connected to the pump and unplug it from the wall outlet. The pump is fragile, so pack it securely in a box with packing material to prevent damage during the move.
Jesus' Human Nature: Eating, Sleeping, and Toilets
You may want to see also
Frequently asked questions
Press the down arrow on the hand-held controller to deflate your Sleep Number bed mattress. To deflate a double chamber mattress, hold the “R” right or “L” left button simultaneously with the down arrow button. When the display reads zero, the chambers are empty.
Detach the air hoses on each side of the bed and place the air chamber caps on the hose connectors. Place your mattress in a plastic bag if it is a smart bed.
With the mattress unzipped, find the gray tab on the side where the hose attaches to the air chamber. Push in the tab and gently pull the hose out of the mattress cover. Then, remove the air chambers, foam border walls, and corner locks until you get to the bottom of the mattress.
