Gina Johnson
If your Brother printer is in deep sleep mode, it may not wake itself up when you try to print from your PC or mobile device via wifi. To take your Brother printer out of deep sleep mode, you can try resetting it by turning it off and on again, or opening and closing the front cover where the toner is. You can also try accessing the hidden Deep Sleep menu and disabling the feature. If you cannot access the Deep Sleep menu, you may need to update your printer's firmware.
Characteristics and Values
| Characteristics | Values |
|---|---|
| Resetting the printer by turning it off and on | A temporary solution to wake the printer up |
| Opening and closing the front cover | Wakes the printer up |
| Pressing any button | Does not wake the printer up |
| Pressing the START and OPTIONS keys simultaneously | The LCD will read "Sleep Mode: On." |
| Pressing the UP OR DOWN ARROW key | Allows you to choose Off |
| Pressing the OK key | Confirms the selection |
| Pressing the STOP/EXIT key | Exits the process |
| Sleep Mode timer | Reset when the machine receives PC data or makes a copy |
| Factory setting for Sleep Mode timer | 05 minutes |
Explore related products
What You'll Learn
Access the 'Deep Sleep' menu
To access the Deep Sleep menu on your Brother printer, you can try the following methods:
Method 1: Using the Printer's Control Panel
- Press the Start and Options keys simultaneously on your printer's control panel.
- This should display "Sleep Mode: On" on the LCD screen.
- Use the Up or Down arrow key to select Off.
- Press OK to confirm the change.
- Finally, press the Stop/Exit key to exit the menu.
Method 2: Through Computer Settings
- Go to the "Printer and Devices" section in your Windows settings.
- Click on "Troubleshoot," even if your printer doesn't show any issues.
- Sometimes, this action will prompt the printer to start printing queued jobs, effectively waking it from deep sleep mode.
Method 3: Power Cycle the Printer
- If all else fails, the simplest way to wake your Brother printer from deep sleep is to turn it off and then on again.
- This method may not always be convenient, but it is effective in resetting the printer and bringing it back to an active state.
It's important to note that some Brother printers may have specific procedures to adjust sleep settings, so referring to your printer's manual or the official Brother support website can provide model-specific instructions.
Rest Without Sleep: A Useful Strategy for Productivity
You may want to see also
Explore related products
Update the printer's firmware
Updating your Brother printer's firmware is a straightforward process that can be done through the Firmware Update Tool, available on the Brother website. Here is a step-by-step guide to help you update your printer's firmware:
Step 1: Connect the Printer
Firstly, ensure your printer is properly connected to a power source and turned on. Use the AC adapter and connect it to an AC power outlet with the appropriate voltage (100-240 VAC, 50-60 Hz).
Step 2: Connect to Computer
Connect your printer to a computer using a USB cable. One end of the cable should be connected to the USB port on the printer, and the other end to a USB port on your computer.
Step 3: Download the Firmware Update Tool
Visit the Brother website (http://www.brother-usa.com) and navigate to the Downloads section to download the Firmware Update Tool. This tool will guide you through the firmware update process.
Step 4: Unzip the Downloaded File
Once the Firmware Update Tool has been downloaded, locate the file on your computer. Double-click on the file to unzip it and extract the necessary installation files.
Step 5: Run the Firmware Update Tool
After unzipping the file, double-click on the installer package icon, such as "FirmwareUpdateTool.pkg" or "BrMainXXXX.dmg". Follow the on-screen instructions to initiate the firmware update process. You may be prompted to enter your password during this step, so have your Mac password ready.
Step 6: Initiate the Firmware Update
During the firmware update process, follow the on-screen instructions provided by the Firmware Update Tool. This may involve clicking on specific files, such as "FirmwareUpdater.jar", and ensuring that your machine remains on throughout the update.
Step 7: Wait for Completion
The firmware update process can take up to 15 minutes. It is important not to interrupt the process or turn off your printer or computer during this time. Once the update is 'Successfully Completed', you can click 'Continue' to update another machine, if necessary.
Step 8: Post-Update Steps
After the firmware update is complete, it is recommended to power cycle your printer. This involves turning the printer off and then on again. Additionally, you may want to print a test page to verify that your printer is functioning correctly after the firmware update.
Updating your printer's firmware can help improve its performance and fix any existing issues. Remember to always check that you have the latest firmware version to ensure your printer operates optimally.
Sleeper Availability in Alabama: A Quick Guide
You may want to see also
Explore related products
$142.49 $149.99
Adjust the Sleep Mode setting
Adjusting the Sleep Mode setting on your Brother printer can help you avoid the issue of the printer not waking up from sleep mode. Here are the steps you can take:
Firstly, it's important to understand what Sleep Mode does. Sleep Mode reduces power consumption by turning off the fuser inside the printer when it is idle. You can choose how long the printer remains idle before it goes into Sleep Mode. The default setting is 5 minutes, but you can adjust this to your preference.
To adjust the Sleep Mode setting, follow these steps:
- Press the "Start" and "Options" keys simultaneously.
- The LCD screen will display "Sleep Mode: On".
- Use the Up or Down arrow key to select "Off".
- Press the "OK" key to confirm the change.
- Press the "Stop/Exit" key to exit the menu.
By following these steps, you can turn off Sleep Mode and prevent the printer from automatically entering a low-power state after a period of inactivity. This should help resolve issues with the printer not waking up from sleep.
If you continue to experience problems with your Brother printer not waking up from sleep mode, there are a few additional troubleshooting steps you can try. These include turning the printer off and on again, opening and closing the front cover, or sending a print job from a different device.
Red Light Therapy: Enhancing Sleep Quality
You may want to see also
Explore related products
Turn the printer off and on
If your Brother printer is in deep sleep mode, one way to wake it is to turn the printer off and then on again. This method is confirmed by multiple users to work.
Firstly, locate the power button on your Brother printer. This is usually a circular button that you push in to turn off, located on the front or top of the printer. Once you have located it, simply press the button to turn the printer off. If you are unable to find the power button, refer to your printer's manual or search for your specific model online.
After turning off the printer, wait a few moments for it to power down completely. You will know it is off when the display panel turns off or goes blank, and any lights or indicators turn off. If your printer model has a physical switch, ensure that it is flipped to the "off" position.
Now that the printer is off, you can turn it back on. Simply press the power button again, and hold it down until the printer powers on. You may need to hold the button for a few seconds. The display panel will turn on, and the printer will begin its startup process.
Once the printer has finished starting up, it should be awake and ready for use. You can try sending a test print job to ensure it is no longer in deep sleep mode. If you continue to experience issues with deep sleep mode, there are other methods to wake your Brother printer that you can try.
Prescription Sleeping Pills: Expiry and Effectiveness
You may want to see also
Explore related products
Open and close the front cover
If your Brother printer is in deep sleep mode, one way to wake it up is by opening and closing the front cover. This method works for the Brother HL-L2305W printer model.
To do this, first, locate the front cover of the printer. This is usually the side of the printer where the toner cartridge is installed. Next, gently open the front cover by pulling it towards you or by pressing the release button or lever, depending on your printer model. Once it's open, you can close it by gently pushing the cover back into place until you hear a soft click or until it latches securely.
Opening and closing the front cover of your Brother printer can help bring it out of sleep mode and deep sleep mode. It's a simple process that only requires you to manipulate the front cover of your printer. Remember to handle the cover with care and ensure it is securely closed before attempting to use the printer again.
By performing this action, you are essentially resetting the printer's current state and prompting it to become active again. This method is particularly useful when the printer is unresponsive to other wake-up methods, such as pressing buttons or sending print jobs.
How Often Should You Use Your AirSleep Snore Device?
You may want to see also
Frequently asked questions
Try turning the printer off and on again.
Open and close the front cover where the toner is.
Press the "Start" and "Options" keys at the same time. Then, press the up or down arrow key to choose "Off".
You can adjust your printer's Sleep Mode settings by choosing how long the machine is idle before it goes into Sleep Mode.
The Sleep Mode setting reduces power consumption by turning off the fuser inside the machine when it is idle.
