Colin Snow
If you're having trouble with your Sleep Number® remote, there are several ways to control your mattress without it. First, you can try unplugging the central pump unit, plugging it back in, and pressing both the upper and lower buttons on the remote simultaneously to reset the unit's circuit. If that doesn't work, you can use the SleepIQ or Sleep Number app on your smartphone by pairing it with your pump unit. You can also use a battery-powered camping bed inflator to manually inflate the bed. Additionally, you can find the Find Your Sleep Number setting in the app and follow the instructions to adjust your mattress to your preferred firmness.
Characteristics and Values Table for Filling Sleep Number without a Remote
| Characteristics | Values |
|---|---|
| Devices | iOS, Android |
| Apps | Sleep Number, SleepIQ |
| Settings | Find Your Sleep Number, Bed Settings, Connectivity, Wi-Fi settings |
| Actions | Download the app, register your smart bed, log in, scan for beds, select the bed you wish to control, adjust your Sleep Number setting, inflate the air chamber |
| Other Tools | Pump, camping bed inflator |
Explore related products
What You'll Learn
Use the SleepIQ app on your phone
If you don't have a remote, you can use the SleepIQ app on your phone to fill your Sleep Number bed. Here's how to do it:
First, download the Sleep Number app from the App Store or Google Play Store, depending on your device. Make sure your app is up to date. Once you have the app, register your smart bed if you haven't already. Open the app and log in. Go to "Smart Bed" and tap "Finish Setup." This may take a few minutes. Confirm that your bed is fully assembled and that no one is on the bed during the pairing process, then select "Continue."
Next, start the bed pairing process. The instructions will vary depending on the type of smart bed and base you have. For example, you may need to press and hold the button on the side of the bed until the light starts flashing blue. Follow the specific instructions for your bed model.
During the pairing process, make sure to stay within 8 feet of your bed. You may also need to enable Bluetooth and location services on your device. Once the pairing is complete, you can adjust your Sleep Number settings, change your bed position, and control accessories such as under-bed lighting and foot warming.
You can also use the Sleep Number app to inflate your bed. Remove all bedding and ensure your bed is in the flat position. Then, inflate your chamber(s) to 100 using the app. If you have a FlexTop or Split King bed, use the app to raise the head of your bed, then unsnap the black straps connecting the mattress to the base. Return your bed to the flat position and unplug its power cord.
By following these steps, you can use the SleepIQ app on your phone to fill your Sleep Number bed without a remote.
Sleep Deprivation: A Matter of Life and Death
You may want to see also
Explore related products
Pair the pump unit to the phone app
To pair the pump unit to the Sleep Number app, you will first need to download the Sleep Number app from the App Store for iOS devices or the Google Play Store for Android devices. Once you have downloaded the app, open it and log in. If you do not have an account, you will need to register your smart bed and create one.
After logging in, go to "Smart Bed" and tap "Finish Setup". Confirm that your bed is fully assembled and that no one is on the bed during the pairing process, then select "Continue". Next, press and hold the button on the side of the bed until the light starts flashing blue. Wait for the bed to configure, then press and hold the pairing button on the Smart Control System (pump) until the light starts flashing yellow.
Remain within 8 feet of the bed for the app to begin pairing. You will then need to confirm that you want to connect the Smart Bed and tap "Allow". Finally, connect the Smart Bed to your Wi-Fi network. Make sure that your Wi-Fi password is correct as they are case-sensitive. If you are still having issues, try moving your router closer to your bed.
Strategies for a Good Night's Sleep Without Bed-Wetting
You may want to see also
Explore related products
$9.79
Use a battery-powered camping bed inflator
If you have a Sleep Number bed and your remote control is not working, you can use a battery-powered camping bed inflator to inflate your bed.
Firstly, check for any leaks in your mattress. You can identify a leak by listening out for any escaping air. If you find a leak, tighten the fitting with your fingers or grips. If the bed has been moved to access the pump, there may be a kink in the hose line. To resolve this, straighten the kink to allow uninterrupted airflow.
Next, locate the inflation air tube and connect the pump to it. Make sure the valves to all the lines are closed off to prevent air from escaping. Switch on the pump and inflate the mattress to your desired level.
If you don't have a battery-powered camping bed inflator, you can use the SleepIQ app on your phone to pair the pump unit to your phone and control the inflation. Alternatively, you can use the directional switch on top of the pump to override the remote control.
The Comfort of Blankets: Why We Need Them to Sleep
You may want to see also
Explore related products
Unplug the central pump unit from the outlet
If your Sleep Number bed is not inflating, the first thing you should do is check if the pump is plugged in. The pump and the remote should be synchronized, and an accidental unplugging could cause the system to reset. If this happens, you can unplug the central pump unit from the outlet and leave it unplugged for a short time. This will reset the unit's circuit. Plug the unit back in and, at the same time, press both the upper and lower buttons on the remote.
If the pump is plugged in and it is still not working, you can try to reset the unit by removing the inlet hose and placing the cap supplied with the bed over the inlet to prevent air from escaping. Hold down both toggle switches simultaneously for ten seconds. The unit should now be reset. Replace the hose, and the pump should now be working.
If you are still having issues with filling the bed with the remote control, your bed should have come with a pump to inflate it manually. You can use a battery-powered camping bed inflator to inflate your bed.
If you are troubleshooting your Sleep Number bed pump, check that the air tube connections between the pump and the bed are secure to avoid air leaks. Also, make sure the remote is correctly synced with the pump.
Gauze-Free Wisdom Teeth Recovery: Safe Sleep?
You may want to see also
Explore related products
Download the Sleep Number app
The Sleep Number app is available for download on the App Store for iOS devices and the Google Play Store for Android devices. The app is the only way to get your bed online, and it allows you to control your Sleep Number smart bed.
To download and set up the Sleep Number app, follow these steps:
- Download the Sleep Number app on your device from the respective app store.
- Register your Sleep Number smart bed account if you haven't already. You will need your home Wi-Fi network name and password for this step.
- Ensure that your bed is fully assembled, connected to a power source, and within 8 feet of your device during the setup process.
- Turn on Bluetooth and enable location services on your device.
- Open the Sleep Number app and log in to your account.
- Tap "Smart Bed" and then the ""Settings" icon in the upper-right corner of the app.
- Select "Bed Settings" and follow the on-screen instructions to pair your bed with the app.
Once you have downloaded and set up the Sleep Number app, you can use it to control various features of your mattress, such as firmness, support, bed position, and accessories like underbed lighting and foot warming. You can also use the app to adjust your Sleep Number setting and find your ideal sleep preferences.
How to Sleep Better with Hemorrhoids: Underwear or Not?
You may want to see also
Frequently asked questions
You can use the SleepIQ or Sleep Number app on your phone. Download the app, register your smart bed, and log in. In the app, go to "Smart Bed" and tap "Finish Setup". Confirm that your bed is fully assembled and that no one is on the bed, and then start the pairing process.
Press and hold the button on the side of the bed until the light starts flashing blue. Wait for the bed to configure, and then press and hold the pairing button on the Smart Control System (pump) until the light starts flashing yellow. Confirm you want to connect the bed and tap "Allow".
You can manually inflate the bed with a pump that should have been supplied with the bed. Alternatively, you can use a battery-powered camping bed inflator.
Lie on the bed in your preferred sleeping position and press the Right/Left or side button to select your side of the bed. Then, press Enter to show the main menu.
Yes, you can use the app while logged out. Just make sure Bluetooth is turned on and that you are within 8 feet of your bed for Bluetooth to connect.
